AAConnecting with NFC function (WAM750, WAM751, WAM550, WAM551 Only) - Android

You can connect the M7(M5) to Bluetooth devices easily by gently touch the smart device to the

mark on the top panel of the M7(M5).

Connect your NFC compatible device to enjoy music with high quality stereo sound, all without wires.

ConnectSmart device1Plug the M7(M5) into an electrical outlet.

2Turn on the NFC function on your Smart device, and then gently touch the device to the

mark on the top panel of the M7(M5).

3The Bluetooth screen appears on your Smart device.4Select OK.5Select the desired track to play from your smart device's music list.6The M7(M5) plays the track you selected.

NOTES

 

99To disconnect the Bluetooth connection, gently touch the smart device to the

mark on the top

panel of the M7(M5) again.

 

99Please be careful not to disturb other buttons around the NFC tag.

99Do not place or play back your NFC device on top of the NFC tag on the M7(M5). Vibrations from the music may cause the device to tip over and cause the M7(M5) to disconnect or damage the device.

99The NFC function is built into Android devices running Android OS 4.1 Jellybean or later.

99The position of the NFC antenna differs on different devices. Check where the NFC antenna is before

connecting.
99If your device is covered with a thick case, the connection may not succeed.
99The

mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in

other countries.

99If you unplug the M7(M5), the NFC connection is terminated. To re-establish the connection, plug the M7(M5) into an outlet, and then set the NFC connection again.

99Tagging the NFC label while the App has not been installed;it guides to the web page for installing the App. 99If tagged, the NFC label with the App installed, the App runs automatically.

4444

31