❚❚ Adding a HUB
An product and a HUB may not pair successfully if the product and HUB are too far apart or are on different floors.
In such cases, you can link two HUBs together by setting the second HUB to Repeater mode. The additional HUB amplifies the signal and lets you pair the product to the closest HUB.
1Set the HUB that is connected to the wireless router to Pairing mode by pressing its SPK ADD button for 1 second.
2Plug in the new HUB you are using as an extender, and then press its SPK ADD button for 10 seconds.
3The newly added HUB's LED indicators turn off and on, and it switches to Repeater mode.
4Once the connection between the two HUBs has been established, the added HUB's ( ) indicator stops blinking.
NOTES
Product
Used as a extender
99If your smart device is not connected to the wireless router |
|
with a | HUB |
Samsung Multiroom app. |
|
99Place the HUB that is in Repeater mode in an appropriate
location between the product and the HUB that is connected to the wireless router. 99You can set only one HUB to Repeater mode.
Relocating the product
When relocating your product, refer to the below table.
|
|
|
Wireless router | If you want to connect your product to | If you want to connect your product to |
HUB | the current wireless router. | a different wireless router. |
|
| Turn off the product, relocate it, then |
Without a HUB |
| establish the new connection as described |
Turn off the product, relocate it and then | in the installation instructions on pages 9 | |
| through 15. Click here. | |
| turn it on. |
|
With a HUB | Connect a LAN cable between the HUB | |
| and the new wireless router, turn on the | |
|
| HUB, and then turn on the product. |
4444
19