Information codes
Check the diagnostic codes below and follow the suggestions. If a certain symptom continues, contact a local Samsung service center.
Code |
| Action | |
|
| ||
| Check the water level sensor. | ||
| • Power off and power the machine on after | ||
1C |
| again. | |
• | Depending on the model, the drain system drains water automatically. | ||
| |||
|
| The POWER and START/PAUSE buttons may be disabled during this | |
|
| process. | |
|
| ||
| Check the temperature sensor on the dry air. | ||
TC2 | • | Power off and power the machine on after | |
|
| again. | |
|
| ||
DC | The door is open. | ||
• | Close the door and press START/PAUSE to resume operation. | ||
| |||
|
| ||
| Check the door switch. | ||
DC1 | • | Power off and power the machine on after | |
|
| again. | |
|
| ||
| Check for water leaks. | ||
| • Power the machine off and check the drain system for any leak. Once | ||
LC |
| the leak is solved, power the machine on after | |
• | Depending on the model, the drain system drains water automatically. | ||
| |||
|
| The POWER and START/PAUS buttons may be disabled during this | |
|
| process. | |
|
| ||
| Check the fan motor. | ||
FC | • | Power off and power the machine on after | |
|
| again. | |
Check the water supply line.
•Check for the connection of the water line (including water taps).
•Power off and power the machine on after
4C again.
•Depending on the model, the drain system drains water automatically. The POWER and START/PAUS buttons may be disabled during this process.
Troubleshooting
English 47
|
| ||
|
| ||
|
|
|
|