washing a load of laundry
Using dry course
Refer to the label of drying capacity and be sure to put in the clothes to the lower level than the marked line for the dried clothe of 5.0kg.
1.Open the door, put in the clothes and close the door again.
2.Press the Power button and then press the Drying button. : The standard course will be selected automatically.
Drying is limited in some courses.
3.Select Drying button as follows. Drying Programs
•Every press of this button will select drying type repeatedly in the following order:
Cup Board 
Low Temp 
Iron 
Time Dry 
(30min. 1:00min. 1:30min. 2:00min. 2:30min. 3:00min. 3:30min. 4:00min. 4:30min.)
Cup Board
Drying Type |
| Information | Max | Time | ||
| Load | (Max Load) | ||||
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| Cupboard ( | ) | Standard: Dries the laundry. | 3.5kg | 169min. |
|
|
|
|
|
|
|
Auto Drying |
|
|
| Dries the laundry at a low |
|
|
| Low Temp. ( | ) | temperature to protect the texture | 2.0kg | 160min. | |
|
|
|
| of the laundry. |
|
|
|
|
|
|
|
|
|
|
| Iron ( ) |
| For leaving items partially damp | 2.0kg | 30min. |
|
|
| so that it can be easily ironed. | |||
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| You can select the appropriate |
|
|
Time Drying ( | ) |
| drying time depending on the | 5.0kg | 270min. | |
|
|
|
| texture, quantity, and moisture. |
|
|
|
|
|
|
|
|
|
•It automatically displays Drying Time by sensing the weight of clothes before drying for increasing the drying effect.
•For laundry weighing less than 3.5kg, use the Auto Dry. For laundry that weighs more, please use the Time Dry.
•If both the spin and drying cycles are selected, the spin speed is automatically selected to enhance the drying efficiency.
•When using the drying cycle, check if the water supply valve is opened.
4.Put suitable amount of detergent and fiber softener in the detergent tray and close it again.
5.Press Start/Pause button.
:It automatically performs an optimal function from washing to drying.
•The selected course can’t be altered after the start of drying.
•If you select Drying function, the intensity of SPIN will be set up as High in default for increasing the drying effect.
•If cold water is not supplied, drying will not be performed.
•In case you wish to dry after hand washing, select both Spin and Dry at the same time.
26_ washing a load of laundry
2014/6/11 17:14:05
