Cleaning the debris filter
We recommend cleaning the debris filter 5 or 6 times a year, or when the error message of “5E” is displayed. (Refer to “Draining the washing machine in an emergency” in the previous page.)
Before cleaning the debris fiilter, make sure to unplug the power cord.
CAUTION
1.Remove the remaining water fiirst (refer to “Draining the
washing machine in an emergency” on page 33.)
If you separate the fiilter without draining the remaining water, the remaining water may trickle out.
2. Open the filter cover by using a key or coin.
3.Unscrew the emergency drain cap by turning it to the left and drain off all the water.
4. Unscrew the debris filter cap. | Debris flter cap |
5. Wash any dirt or other material from the debris filter. Make sure the drain pump propeller behind the debris filter is not blocked.
6. Replace the debris filter cap.
7. Replace the filter cover.
Do not open the debris fiilter cap while the machine is running or hot CAUTION water may fllow out.
• Make sure to replace the fiilter cap after the fiilter cleaning. If the fiilter is out of the machine, your washing machine may malfunction or leak water.
•The fiilter should be fully assembled after the fiilter cleaning.
Cleaning the exterior
1.Wipe the washing machine surfaces, including the control panel, with a soft cloth using a nonabrasive household detergent.
2.Use a soft cloth to dry the surfaces.
3.Do not pour water onto the washing machine.
cleaning and maintaining your washing machine _35
