![](/images/new-backgrounds/1292704/29270435x1.webp)
setting up your washing machine
Connecting the drain hose
The end of the drain hose can be positioned in three ways:
1.Over the edge of a wash basin: The drain hose must be placed at a height of between 60 and 90 cm. To keep the drain hose spout bent, use the supplied plastic hose guide. Secure the guide to the wall with a hook or to the tap with a piece of string to prevent the drain hose from moving.
2.ln a sink drain pipe branch: The drain pipe branch must be above the sink siphon so that the end of the hose is at least 60 cm above the ground.
Drain hose
Hose guide
60 ~ 90 cm
3.ln a drain pipe: We recommend using a 65 cm high vertical pipe; it must be no shorter than 60 cm and no longer than 90 cm.
The standpipe drain requires;
•minimum diameter 5 cm.
•minimum
60 ~ 90 cm
STEP 5
Powering your washing machine
Plug the power cord into a wall sockets, an AC
Test run
Make sure that you install your washing machine correctly by running the Rinse+Spin cycle after the installation is complete.
STEP 6
Select the Language (selected LCD models)
At the beginning setting (After power on), the “Language setting” message appears on the display. you can select one language among English, French, Dutch, German, Italian, or Spanish. (Portuguese, Danish, Finnish, Norwegian, or Swedish.)
* Language selections can be changed according to derived models.
1. Push the Rinse button to choose a language.
2.Push the Spin button to set the chosen language.
To reselect the language, press the Rinse and Spin buttons simultaneously for 3 seconds.
The LCD display Language may differ depending on the model.
These languages are available only for WF1124 series.
These languages are available only for WF2124 series.