setting up your washing machine

Connecting the water supply hose (selected models)

1. Remove the adaptor from the water supply hose.

Adaptor

Water supply hose

2.First, using a ‘+’ type screwdriver, loosen the four screws on the adaptor. Next, take the adaptor and turn part (2) following the arrow until there is a 5 mm gap.

1

5 mm

2

 

3.Connect the adaptor to the water tap by tightening the screws firmly while lifting the adaptor upwards.

Turn part (2) following the arrow and connect (1) and (2).

1

4.Connect the water supply hose to the adaptor.

When you release part (3), the hose automatically connects to the adaptor making a ‘click’ sound.

After you have connected the water supply hose to the adaptor, ensure that it is connected correctly by pulling the water supply hose downwards.

Water tap

2

3

5.Connect the other end of the water supply hose to the inlet water valve at the rear of the washing machine. Screw the

hose clockwise all the way in.

Option

18_ setting up your new washing machine

 

 

 

 

WF702Y4BK-03149E-03_EN.indd 18

2013-5-14 8:55:49