70~80cm above the ground. (With pump)
70~80cm
2.Set the WASH SELECTOR KNOB 
to the desired mode.
3.Set the CYCLE SELECTOR KNOB to ‘WASH. RINSE’.
Without pump |
|
With pump | |
|
|
4.Set the WATER SELECTOR KNOB 
to WASH.
5.Load laundry in the wash
tub.
6.Fill water in the wash tub 
and add the detergent. 
7.Set the WASH TIME
minutes.
8.After washing,set the CYCLE 
SELECTOR KNOB to ‘DRAIN’ 
for drain.
Spinning dry
1.Transfer the clothes into the spin basket and arrange the clothes evenly.
| Bottom of balancer | |
| safety cover | |
2. | Be sure to attach the | Inner lid |
| safety cover and close the |
|
| inner lid. | Safety cover |
3. | Close the spin dryer lid. |
|
4. Set the AIR TURBO SPIN TIMER
5.Incomplete spining.(Severe vibration or unbalance) See “When you load ...”on page 6.
Rinsing
1.Set the CYCLE SELECTOR KNOB to ‘WASH RINSE’.
Without pump |
|
With pump |
2.Supply the proper amount of water as not to overflow the top of the washing tub.
3.Set the WASH TIMER 2~3
minutes.
4. Drain the water.Set the CYCLE SELECTOR KNOB to ‘DRAIN’.
5.Repeat this cycle until drain water is clean. (2~3 cycles)
washing procedure _5
|
| ||
|
| ||
|
|
|
|