![](/images/new-backgrounds/1208368/20836839x1.webp)
Installation
Installation
3. Hold the adaptor and turn part (C) in the arrow direction to loosen it by 5 mm (*).
C |
4. Insert the adaptor into the water tap, and tighten the screws while lifting up the adaptor.
5. Turn part (C) in the arrow direction to
C
tighten it.
6. While holding down part (D), connect the water hose to the adaptor. Then, release part (D). The hose fits into the adaptor with a clicking sound.
D |
7. If you are using a screw type of water tap, use the provided
20 English