Samsung WW80K44305W/LE, WW70K44305W/LE, WW80K44305X/LE manual AC6, Returns to normal operation

Code		Action
	The electronic control needs to be checked.
	• Check if power is supplied properly.
	• If the information code remains, contact a customer service
UC	centre.
	Low voltage detected.
	• Check if the power cord is plugged in.
	• If the information code remains, contact a customer service
	centre.
	High temperature heating check.
HC	• If the information code remains, contact a customer service
	centre.
	The Water Level sensor is not working properly.
1C	• Turn the machine off, and restart the cycle.
	• If the information code remains, contact a customer service
	centre.
	Check communications between main and sub PBAs.
AC	• Turn the machine off, and restart the cycle.
	• If the information code remains, contact a customer service
	centre.
	This message appears when you open the Add Door without
	pressing	Start/Pause. If this happens, do one of the following:

•Press the Add Door to close properly. Then, press Start/

DDC, ddC Pause and try again.

•To add laundry, open the Add Door and input laundry. Close the Add Door properly. Then, press Start/Pause to resume operation.

	The MEMS sensor is not working properly.
8C	• Turn the machine off, and restart the cycle.
	• If the information code remains, contact a local Samsung
	service centre.
	Check communications between the main and the inverter PBAs.
	• Depending on the state, the machine may automatically
AC6	returns to normal operation.
	• Turn the machine off, and restart the cycle.
	• If the information code remains, contact a local Samsung
	service centre.

Troubleshooting

English  55 

Untitled-35 55

2017-05-30 ￿￿ 4:54:44