Samsung WW70K52109W/LE, WW70K52109W/ZE manual AC6, DC1, DC3

Code			Action
	This message appears when you open the Add Door without
	pressing		Start/Pause. If this happens, do one of the following:
DDC, ddC	•	Press the Add Door to close properly. Then, press			Start/
		Pause and try again.
	• To add laundry, open the Add Door and input laundry. Close
		the Add Door properly. Then, press		Start/Pause to resume
		operation.
	The MEMS sensor is not working properly.
8C	• Turn the machine off, and restart the cycle.
	• If the information code remains, contact a local Samsung
		service centre.
	Check communications between the main and the inverter PBAs.
	• Depending on the state, the machine may automatically
AC6		returns to normal operation.
	• Turn the machine off, and restart the cycle.
	• If the information code remains, contact a local Samsung
		service centre.
	The Main Door lock/unlock is not working properly.
DC1	• Turn the machine off, and restart the cycle.
	• If the information code remains, contact a local Samsung
		service centre.
	The Add Door lock/unlock is not working properly.
DC3	• Turn the machine off, and restart the cycle.
	• If the information code remains, contact a local Samsung
		service centre.

If any information code keeps appearing on the screen, contact a local Samsung service centre.

Troubleshooting

English  55 

Untitled-4 55

2017-09-01 ￿￿ 12:40:23