Samsung WW70K52109W/LE, WW70K52109W/ZE manual Operations, Control panel

Operations

Control panel

02				10
				08
				11
01				09
03	04	05	06	07

01	Cycle Selector	Turn the dial to select a cycle.
02	Display	The display shows current cycle information and estimated time
		remaining, or an information code when a problem occurs.
03	Temp.	Press to change the water temperature for the current cycle.
04	Rinse	Press to change the rinse count for the current cycle. You can set
		the rinse count to a max of 5, depending on the cycle.
		Press to change the spinning speed for the current cycle.

•Rinse Hold : The final rinse process is suspended so that the laundry remains in the water. To unload the laundry, run a drain or spin process.

•No Spin : The drum does not rotate after the final drain

05 Spin process.

•Spin Only : To run the Spin Only cycle, press Spin for 3 seconds. When the cycle time and spinning speed appear, press Spin repeatedly until a desired spinning speed is selected. Then, press Start/Pause to start the cycle. The spinning time depends on the selected cycle.

	Press to select an option from Intensive, and Pre Wash. Press
06 Options	again to deselect.

•Availability of the options depends on the cycle.

Press to activate/deactivate the Bubble Soak function. This function helps remove a wide variety of stubborn stains.

07 Bubble Soak • Bubble Soak is available with and adds up to 30 minutes to 5

cycles: COTTON , SYNTHETICS , DAILY WASH , BEDDING , and BABY CARE .

Operations

English  31 

Untitled-4 31

2017-09-01 ￿￿ 12:40:17