HOW TO OPERATE THE PERSONAL TELEVISION
IMPORTANT: Before operating the television, you must connect a 75 ohm CATV cable to the 75 ohm terminal on the treadmill, a VCR or DVD player to the audio/video input jack, or a personal audio/video player to the audio/video jack below the television on the console. See page 13 for in- structions.
Follow the steps below to operate the television.
1.Insert the key into the console.
See HOW TO TURN ON THE POWER on page 16.
2.Press the Power button to turn on the television, and press the AV button to select a television source.
Press the Power button repeatedly until the word TUNER appears on the screen. Next, select a television source by pressing the AV button re- peatedly. If you have connected a 75 ohm CATV cable or a VCR to the 75 ohm terminal on the treadmill, press the AV button until the word TUNER appears on the screen. If you have plugged a DVD player or a VCR into the three audio/video RCA jacks, press the AV button until the words INPUT 1 appear. If you have connected a personal audio/video player to the audio/video plug below the television on the console, press the AV button until the word MP3 appears. Note: To turn off the television, press the Power button until the word CONSOLE appears.
3.Press the Channel buttons to select the desired channel.
Note: Complete this step only if you are using analog cable. Otherwise, change channels through an external source such as your cable box or your VCR.
When the television is turned on, the screen will show the last channel that was selected. To select
a different channel, press the Channel (CH.) but- tons. The selected channel number will appear on the screen for a few seconds. Note: The television is equipped with a channel memorizing function that allows you to go directly from the current channel to the next channel saved in memory. Before channels can be selected in this way, they must be saved in the television’s memory. See THE INFORMATION MODE on page 25.
4.Press the Volume buttons to adjust the volume.
When either Volume (VOL.) button is pressed, the volume level indicator will appear on the screen for a few seconds.
To use earphones or headphones (not included), plug them into the headphone jack below the key on the console.
HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the console’s stereo speakers, you must connect your MP3 player, CD player, or personal audio/video player to the con- sole. Locate the audio/video plug below the television on the console, and plug it into a jack on your MP3 player, CD player, or personal audio/video player.
Make sure that the audio/video cable is fully plugged in.
Next, press the Play button on your MP3 player, CD player, or personal audio/video player. Then, adjust the volume on your MP3 player, CD player, or per- sonal audio/video player. You can also adjust the vol- ume on the console by pressing the Volume increase and decrease buttons.
If you are using a personal CD player or a DVD player and the CD or DVD skips, set the CD player or DVD player on the floor or another flat surface instead of on the console.
24
