![](/images/new-backgrounds/1145735/14573521x1.webp)
11. See drawing 11a. Remove the indicated #8 x | 11a | 11b |
|
| |
| 3/4" Screw (7) from the right Handrail (70). |
| Console | ||
|
|
|
| ||
|
|
|
|
| Assembly |
| See drawing 11b. Slide the Right Upright |
|
|
|
|
| Sleeve (9) up to the console assembly. Attach |
|
|
|
|
| the Right Upright Sleeve with two #8 x 1" Tek |
|
|
|
|
| Screws (82) and the #8 x 3/4" Screw (7) as | 70 |
|
|
|
| shown. |
|
|
|
|
| Attach the Left Upright Sleeve (not shown) in the |
|
| 7 |
|
| 7 |
|
|
| |
| same way. |
| 9 |
| |
|
|
| 82 | ||
|
|
|
|
| |
12 | With the help of a second person, carefully | 12 |
|
|
|
| lower the Uprights (85) to the position shown. |
|
|
| |
|
|
|
|
| |
| Attach the Right Base Cover (86) with three #8 x |
|
|
|
|
| 3/4" Screws (7) and two Base Cover Screws |
|
|
|
|
| (63). Start all five Screws and then tighten |
| 85 |
|
|
| them. Be careful not to overtighten the |
|
|
| |
|
|
|
|
| |
| Screws. Attach the Left Base Cover (88) in the |
|
|
| 7 |
| same way. |
|
|
| |
|
|
|
|
| |
| With the help of a second person, carefully raise |
|
|
| 88 |
| the Uprights (85) to the vertical position. |
|
|
| |
|
|
|
| 63 | |
|
|
|
|
| |
|
|
| 7 |
|
|
|
|
| 86 |
|
|
|
|
| 63 |
|
|
13. Note the location of the 75 ohm terminal on the | 13 |
|
|
| |
| treadmill. For the television to operate, an |
|
|
| |
|
|
|
|
| |
| audio/video wire must be connected to the |
|
|
|
|
| audio/video input jack on the back of the con- |
|
|
|
|
| sole, a personal audio/video player must be con- |
|
|
|
|
| nected to the audio/video plug on the console, or |
|
|
|
|
| a CATV cable must be connected to the 75 ohm |
|
|
|
|
| terminal (see page 13). |
|
|
|
|
|
|
|
|
| 75 Ohm |
|
|
|
|
| Terminal |
14.Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex key in a secure place. The hex key is used to adjust the walking belt (see page 30). To protect the floor or car- pet from damage, place a mat under the treadmill.
11