Samsung XE500T1CA04US Using the Sound Recorder, Using the Microphone Optional, Recording Device

Adjusting the Volume	Using the computer	58
	Chapter 3.
Using the Sound Recorder	Connecting and using a Ear-set / headset Jack

The procedures to record sound using the Windows Recorder are described below.

1	Connect a microphone to the microphone jack.
	Or use built-in microphone.
2	Right-click over the Volume icon on the taskbar and select
	Recording Device.
	Check if the microphone is set as the default recording
3 device.
	If this is the case, it is already set as the default device. If not,
	right-click over the microphone and select Set default.
4	Right-click over the Charms menu > Start		to click All
	Apps	> Sound Recorder. Then press Start Recording to

record.

When there is no sound after connecting an earset or headset, configure the settings as follows.

1	On the Desktop, click the Charms menu > Settings	>
	Control Panel > Hardware and Sound > Sound > Play tab.
2	Select the Speakers (Intel SST Audio Device (WDM)), click
	Set Default and click OK.

Using the Microphone (Optional)

You can optimize the microphone’s performance for a single user only or for sharing with others.

1	On the notification area of the taskbar, right-click the Audio
	Manager icon , and then click Sound Manager.

2 On the Microphone tab, select an option to enable, and then click OK.

. Narrow: The computer recognizes sound only from a front 45 degree angle. Select this option if only a single user uses the microphone.

. Wide: The computer recognizes sound from any front angle so that the microphone can be shared with other people. However, this option may cause noise.