Acer Altos G310 manual Configuring the SCSI/SCSI RAID HBA, How to use Scsi HBA setup utility

57

Configuring the SCSI/SCSI RAID HBA

This section briefly shows how to create a RAID 1 (mirror) volume. This feature requires installation/presence of LSI Logic 20320-R or LSI Logic 22320-R U32 SCSI controllers.

How to use SCSI HBA setup utility

During the Power-On Self Test (POST), press <Ctrl > + <C> to enter the LSI Logic Configuration Utility.

Loading HBA Default Settings

1In the LSI Logic MPT SCSI Setup Utility, please press F2 and select Global Properties. Then, select <Restore Defaults>.

2Press ESC, then select <Save changes then exit this menu>.

3Move cursor to <53C1020/1030> and press Enter.

4Move cursor to <Restore Defaults> and press Enter.

5Press ESC, then select <Save changes then exit this menu>.

How to use SCSI RAID HBA setup utility

How To Create RAID 1 (Mirror) volume with a Hot Spare Disk

1In the LSI Logic MPT SCSI Setup Utility, please select <53C1020/ 1030> and press Enter.

2Move cursor to <RAID Properties> and press Enter.

3In Array Disk field, press Space key to change the hard disk to [Yes].

Note: In the Array Disk field, if you change settings, you will see the following messages. Press the DELETE key to erase data.

F3 - keep Data (Create 2 disk array)

Delete - Erase Disk (Create 2 to 6 disk array)

4 In Hot Spare field, press Space key to change the hard disk to [Yes].