viiiContents
4 Configuring the system | 35 |
Upgrading the system | 37 |
Installation precautions | 38 |
ESD precautions | 38 |
Preinstallation instructions | 39 |
39 | |
Opening the server | 40 |
Before opening the server | 40 |
To remove the side panel | 41 |
To remove the front panel | 42 |
Installing and removing storage devices | 43 |
To install a | 43 |
Upgrading the CPU | 45 |
To remove a CPU with heatsink | 45 |
To install a CPU with heatsink | 47 |
Upgrading the system memory | 49 |
Memory configuration | 49 |
To remove a DIMM | 50 |
To install a DIMM | 51 |
Reconfiguring the system memory | 51 |
Installing an expansion card | 52 |
To install an expansion card | 52 |
Installing and removing a hard disk | 55 |
To remove a hard disk | 55 |
To install a hard disk | 56 |
Configuring the SCSI/SCSI RAID HBA | 57 |
How to use SCSI HBA setup utility | 57 |
Loading HBA Default Settings | 57 |
How to use SCSI RAID HBA setup utility | 57 |
How To Create RAID 1 (Mirror) volume |
|
with a Hot Spare Disk | 57 |
RAID Volume Initialization | 58 |
Exit and Restart the server | 58 |
MegaRAID Configuration Utility | 59 |
Load RAID Card Default Setting | 59 |
Create RAID1 Volume | 59 |
Assign Hot Spare Disk | 60 |
Initialize RAID Volume | 60 |
Save And Exit MegaRAID Configuration Utility | 60 |
Configuring Parallel ATA and Serial ATA devices | 61 |
ATA Operate Mode | 61 |
Intel ICH5R Serial ATA RAID introduction | 62 |
Parallel ATA and Serial ATA device configurations |
|
supported by Intel ICH5R | 62 |