74 | 4 Configuring the system |
disk before proceeding. During the migration process, the data on the source disk will be preserved.
Create RAID Volume from Existing Disk
To create a RAID volume from an existing disk,
1 Select the source disk that you wish to use and then click Next.
Important: It is very important to note which disk is the source disk (the one containing all of the information to be migrated) and which one is the target disk. On a RAID Ready system, this can be determined by making a note during POST of which port (e.g. Port 0 or Port 1) the single disk is attached to. You can also use the Intel
