Recording MP3s
✽To move to other modes from the LINE_REC mode, refer to page 47 "Changing Mode"
1 Connect the Audio Output port on the external audio source (or the Line Out port) to the ENC port on the device with the Line cable.
● Press the play button on the external
device to play the music to record.
2 Press and hold the REC button to start MP3 recording.
●If the 
button is pressed, recording is paused and if the 
button is pressed again, the recording resumes.
3 If the REC button is pressed during recording, the recording stops and an MP3 file is created.
●The files are recoded in the order of L001, L002....
and saved as MP3 file in LINE_REC folder after recording.
Note
-Bit Rates can be set within the range of 32Kbps~192Kbps.
-Beeps are disabled while recording.
-Recording is allowed only when there are 1MB or more of free memory .
Notice
-Do not disconnect the Line cable during Recording.
-If the battery is not sufficiently charged, the player will not completely encode the file.
-Adjust the volume of the external audio source to a suitable level and recode it.
42If the volume level is too high, the sound quality may be poor.
Searching for Music/Voice Files
To search for specific parts during play
● Push and hold the “M” button left or right during playback to search for
the a specific section of the music file you want to listen to. | ENG |
| |
● Release the “M” button to resume play normally. |
|
To change tracks during play
●Push the “M” button to the 
position briefly during playback to play the next track.
●Push the “M” button to the 
position briefly within 3 seconds after playback starts, to move to and play the previous track. Push the “M” button to the 
position briefly after 3 seconds to play the current track from the beginning.
To change tracks when stopped/paused
●Push the “M” button left or right in stop/pause mode to move to the previous/next track.
Note
-VBR(Variable Bit Rate) file: A file that constantly changes the compression rate according to the type of sounds, such as their pitch, in the file.
-When playing a VBR file, you cannot move to and play the previous track even if you push
the “M” button to the 
position within 3 seconds after playback starts.
-Files that were downloaded in MP2 or MP1 and had their file extension changed to MP3 may not play.
43
