Spray arms
Limescale and remnants of food in the washing water can block the nozzles in the spray arms and the arm mountings.
Inspect the nozzles in the spray arms for blocked holes due to remnants of food.
If necessary, pull the lower arm |
|
off. Unscrew the upper spray arm | |
|
Fig.3-5
Clean both spray arms under running water.
Refit the spray arms. Make sure that the lower arm
nn
has locked into place and the upper one is screwed tight.
Solvents or Abrasive Cleaning Products
To clean the exterior and rubber parts of the dishwasher, do not use solvents or abrasive cleaning products. Rather, use only a cloth and warm soapy water.
To remove spots or stains from the surface of the interior, use a cloth dampened with water and a little white vinegar or a cleaning product made specifically for dishwashers.
Moving the Appliance
If the appliance must be moved, try to keep it in a vertical position. If absolutely necessary, it can be positioned on its back.
Seals
One of the factors that cause odours to form in the dishwasher is food that remains trapped in the seals. Periodic cleaning with a damp sponge will prevent this from occurring.
When You Go on Holiday
When you go on holiday, it is recommended that you run a wash cycle with the dishwasher empty and isolate from the mains. Turn off the water supply and leave the door of the appliance slightly ajar. This will help the seals last longer and prevent odours from forming within the appliance.
13
