Rangemaster RDW459FI/SF Washing Dishes, Programme overview, Programme selection, Programme data

Washing Dishes

Programme overview

Time delay

Press for additional options (scroll through):

Upper rack wash function

Lower rack wash function

Combi detergent tablets function

Program select

Start/reset button

Programme selection

The most appropriate programme can be identified by comparing the type of crockery, cutlery, etc., as well as the amount and condition of food remains, with the details contained in Table 2-2, the wash cycle table.

The corresponding programme sequence, duration and consumption details are shown in the right half of the table.

Example: Use the normal programme for dishes and utensils that are heavily soiled.

Programme data

The stated programme data are based on standard operating conditions. The values can vary considerably according to:

•Different amounts of dishes

•Temperature of mains water supply

•Pressure of mains water supply

•Ambient temperature

•Fluctuations in mains voltage

•Machine-related factors (e.g. temperature, water volume)

Switching the dishwasher ON

1.Turn on the tap.

2.Open the door.

3.Set ON-OFF button to ON (Fig.2-16); the ON-OFF indicator will light and then all of the programme indicators will light.

4.Press the programme button ‘P’; the programme indicator will light (Fig.2-17).

5.Press the Start/Reset button (Fig.2-18); the corresponding programme indicator will blink.

6.Close the door and the dishwasher will start automatically.

End of programme

Six beeps will indicate that the wash cycle has finished and all the programme indicators light.

On/O￿ button
	Fig.2-16

	On-O￿ indicator
Programme indicator	Programme button	Fig.2-17

Fig.2-18

Start/reset button

7