Samsung Z830MH/MON, Z820MH/ESN manual Slow Motion, NTSC/PAL Selection Method, Disc Change Function

Z-830M 10/17/02 2:23 PM Page 12

SLOW MOTION

Press the SLOW button on the remote control when the play function is on.

-Voices do not come out when the
SLOW button is pressed	SLOW
-Slow playing is 1/2 of the normal
playing speed at 1st press.
-Slow playing is 1/4 of the normal
playing speed at 2nd press.

-Slow playing is 1/8 of the normal playing speed at 3rd press.

-Slow playing is canceled at 4th press.

-The sound is muted during the slow playing.

To return to normal operation

-Press the SELECT(PLAY/PAUSE) button. SELECT

NTSC/PAL SELECTION METHOD

- Press the PAL/NTSC(REPEAT) button

for 1 sec or longer on STOP Mode.	REPEAT
You can matching the picture display	PAL/NTSC
on your TV.

DISC CHANGE FUNCTION

To replace disc during the play

•Press the Return(STOP) button.

•Eject the tray by pressing the Open/Close button.

•Press the DISC CHANGE button to rotate the tray.

Open/Close

STOP

Disc Change

To load additional disc

•Eject the tray by pressing the Open/Close button. It plays continuously even though the tray is ejected.

•When the tray is ejected while playing a disc, the tray does not rotate. Therefore, only up to two discs can be loaded.

SELECT SOUND TO YOUR PREFERENCE

PREPARATION

1.Press the STANDBY/ON button. (The audio is set to the stereo mode automatically)

2.Insert a disc and press the PLAY button.

Press the SOUND Selector button

-Every time you press this button, sound changes as show below

SOUND

(REMOTE CONTROL)

	Screen on your	Audio Output
	TV monitor	L-ch	R-ch
1st press.	L-CH	L-signal	L-signal
2nd press.	R-CH	R-signal	R-signal
3rd press.	STEREO	L-signal	R-signal

When playing a CD-R or CD-RW

User-edited CD-Rs (Recordable) and CD-RWs (Rewritable) can be played back only if they are already “finalized”.

◆You can play back your original CD-Rs or CD-RWs recorded in music CD format. (However, they may not be played back depending on their characteristics or recording conditions.)

◆Some CD-Rs or CD-RWs may not be played back on this unit because of their disc characteristics, damage or stain on them, or if the player’s lens is dirty.

◆CD-RWs may require a longer readout time. (This is caused by the fact that the reflectance of CD-RWs is lower than for regular CDs.)

12