Operating the radio-search tuning
1.Switch on your radio by pressing the Power Button.
Note: The radio is originally set to be 90 minutes auto shut off after Power is switched on
( 
symbol will appear on the display).
If you don’t need this feature, press Power
button for more than 2 seconds until 
symbol removed from the display.
2.Select the required waveband by repeatedly pressing the Band button. On FM bands,
fully extend the Telescopic aerial. On AM (MW) band, rotate your radio for best reception.
3.Press and hold down either the Tuning Up or Down buttons until frequency in the display begins to change rapidly. Release the button.
4.Your radio will scan the selected waveband, stopping each time if finds a station of
sufficient strength. Adjust the volume control to the required level.
6
