Operating the radio – manual tuning
1.Switch on your radio by pressing the Power button.
2.Select the desired waveband using the
Band button. The waveband selected will appear in the display. On FM bands, fully extend the Telescopic aerial. On AM (MW), rotate your radio for best reception.
3.A single press on either the Tuning Up/Down will change the frequency up or down. Adjust the Volume control to the required level.
AM(MW) tuning step
In Europe and other parts of the world AM (MW) tuning steps are 9 kHz, in America the AM tuning step is 10 kHz.
To change the AM tuning step from 10 kHz to 9 kHz, proceed as follows,
1.Switch on your radio and select the AM(MW) waveband.
2.Switch off the radio.
3.Press Tuning Down then Power button, the radio will be changed into 9 kHz tuning step on AM band.
To change the AM tuning step from 9 kHz to 10 kHz, |
|
proceed as follows, | GB |
1.Switch on your radio and select the AM(MW) waveband.
2.Switch off the radio.
3.Press Tuning UP then Power button, the radio will be changed into 10 kHz tuning step on AM band.
7
