Using the TV’s Features
Autotuning
Set VCR Ch/Input | 03. . . |
Set DVD Ch/Input | VID1. . . |
Set SAT Ch/Input | CMPT. . . |
Set AUX Ch/Input | DVI. . . |
Press </> or OK to select.
Press MENU to go to Setup Menu.
| PIP | SWAP | PIP+ | SLEEP |
|
|
|
| ZZZ |
PIP buttons | FREEZE | ZOOM | PIP- | LIGHT |
| ||||
| DISC MENU | INFO |
| |
|
|
| i |
|
| CLEAR |
|
| MENU |
| c |
|
| M |
| ZOOM- | OK |
| ZOOM+ |
| PRESETS |
|
| SKIP |
|
| GUIDE |
|
The choices and a brief explanation follow:
N/A Choose this if you don’t have this particular component connected to the TV, or if you don’t want the TV to automatically tune to the correct channel when you’re using this component.
03/04 Component is connected to the Antenna/Cable jack on the TV, and you want the TV to tune to channel 3 or 4 (VCR only) when you press the corresponding button on the remote. Reminder: make sure the component’s Channel 3/4 switch is set to the appropriate channel.
VID1 Component is connected to the VID1 Video In or
CMPT Component is connected to the Y Pb Pr jacks on the TV and you want the TV to tune to the component video input channel when you press the corresponding button.
RGB Component is connected to the RGB jack on the TV and you want the TV to tune to the RGB input channel when you press the corresponding button.
DVI Component is connected to the DVI jack on the TV and you want the TV to tune to the DVI video input channel when you press the corresponding button.
PIP (Picture-in-PC) Operation
The PIP
PIP Buttons
There are certain remote buttons that control the way the PIP window works:
PIP Brings up the PIP window. Press PIP again to remove the window.
PIP+ and PIP- Changes the PIP channel up or down.
ZOOM Press to zoom in on the PIP picture. Continue to press to zoom in more.
Using the PIP Feature
The PIP feature works with a component that is connected to your TV that has a tuner that displays analog (NTSC) channels. While you may use PIP in different ways, this basic PIP scenario should get you started. When tuned to your PC input, follow these steps.
1.Press the PIP button on the remote control. The PIP window appears on the screen.
2.Press the INPUT button to view PIP from another input channel.
3.Use the PIP+ or PIP- button to change the PIP channel.
Chapter 3 | Graphics contained within this publication are for representation only. | 19 |