Jensen HD5212 Tuner Operation, About HD Radio Technology, Select a Band, Tuning, Preset Stations

HD5212

Tuner Operation

Press the SRC button (2) to switch to HD RADIO mode.

About HD Radio™ Technology

HD Radio technology allows CD-quality digital broadcasting of your local AM and FM radio stations. HD Radio broadcasts can include multiple channels on the same frequency, which is called multicasting. With multicasting, you can receive up to three additional multicast channels: HD2, HD3, HD4. With your HD5212 radio, you will receive HD Radio digital broadcasts automatically when tuned to a station that offers HD Radio technology.

Select a Band

Press the BAND button (3) to change between three FM bands and one AM band. Each band stores up to six preset stations.

@--+-++-r

Tuning

When tuning to an HD Radio channel, "LINKING" will appear on the LCD while the initial digital information is received. Once linked, "Hd1" appears in the bottom left corner of the LCD.

NOTE: Not all FM or AM stations offer HD Radio (digital) broadcasting. You will receive both analog and digital stations with the HD5212.

Manual Tuning

Press the TUNE/CH » (10) or TUNE/CH « (11) button for more than three seconds to enter manual tuning mode, then press the TUNE/CH » or

~

TUNE/CH « buttons to move the radio frequency number up or down one step.

Auto Seek Tuning

Press the TUNE/CH »(10) or TUNE/CH « (11) button to automatically seek the next station.

Mono/Stereo

Press the MONO button (19) to select mono or stereo reception for analog radio stations. You can sometimes improve reception of weak stations by selecting mono operation. When in stereo mode, the "ST" icon (18) appears on the display.

HD Radio Multicast Channels

To tune to an HD Radio multicast channel, tune to the main signal and then press the SELECT button (5). If a subchannel is available, the corresponding multicasting number appears in the bottom left corner of the LCD.

Preset Stations

Six numbered preset buttons store and recall stations for each band.

Store a Station

Select a band (if needed), then select a station. Hold a preset button (13-18) for three seconds. The preset number will appear in the display.

PRESS AND HOLD

PRESET NUMBER APPEARS

11