Jensen HD5212 operation manual MP3/WMA Operation, Acceptable Media, Acceptable Medium Formats

HD5212

MP3/WMA Operation

MP3 and WMA (Windows Media Audio) music files are digital audio files that are compressed to allow more files on a single CD. This unit can play MP3/WMA directly from files contained on a CD-R/RW, SO card or USB device using the buttons on the receiver (or optional remote control) as described below. Many types of software are available for converting audio files into MP3IWMA formats. Jensen recommends Nero or Roxio Easy CD Creator. Depending on the media type and recording method, some CD-RIRWs may be incompatible with this unit. This unit supports playback of MP3/WMA and CODA (CDA), Mixed-Mode CDs and CD-Extra (including multi-session discs). Discs on which the session has not been closed will not play.

Notes on MP3/WMA Play

This unit can play MP3 (MPEG1, 2, 2.5 Audio Layer 3). However, the MP3 recording media and accepted formats are limited. When writing MP31 WMA, pay attention to the following restrictions.

Acceptable Media

The MP3IWMA recording media acceptable to this unit are CD-ROM, CD-R and CD-RW, SO cards and USB devices. When using CD-RW, use full format rather than quick format to prevent malfunction.

Acceptable Medium Formats

The following formats are available for the media used in this unit. The maximum number of characters used for file name including the delimiter (..... ) and three-character extension are indicated in parentheses.

ISO 9660 Level 1 (11 characters)

ISO 9660 Level 2 (31 characters)

Joliet (31 characters)

Romeo (31 characters)

Up to 200 characters can be displayed in the long file name format. For a list of available characters, see the instruction manual of the writing software and the section "Entering File and Folder Names" below. The media reproducible on this unit has the following limitations:

Maximum number of nested folders: 8

Maximum number of files per disc: 999

Maximum number of folders per disc: 255

Maximum number of files per media device: 2000

MP3IWMA written in formats other than those listed above will not play successfully and their file names or folder names will not be displayed properly.

~

MP3IWMA Encoder and CD Writer Settings

Use the following settings when compressing audio data in MP3 data with the MP3 encoder.

Transfer bit rate: 32 - 320 kbps

Sampling frequency: 32, 44.1, 48kHz (WMA) and 16, 22.05, 24, 32, 44.1, 48kHz (MP3)

When using a CD writer to record MP3/WMA up to the maximum disc capacity, disable additional writing. To record an empty disc up to the maximum capacity at once, select the "disc at once" option.

Entering ID3 Tag

This unit supports 103 tag versions 1.0 0 1

and 1.1. For the character codes, refer to the table to the right.

Entering File and Folder Names

Names using the code list characters are the only file names and folder names that can be entered and displayed. Using any other character will cause the file and folder names to be displayed incorrectly. The unit recognizes and plays only files with the MP3IWMA extension.

NOTE: A file name entered with characters not on the code list may not play correctly.

Writing Files into a Medium

When a medium containing MP3IWMA data is loaded, the unit checks all data. If the medium contains many folders or non-MP3/WMA files, MP31 WMA play will be delayed, it may take time for the unit to move to the next file, and searches may not be performed smoothly or it may not play at all. Loading such a medium may produce loud noise and cause damage to the speakers. Do not attempt to playa medium containing a non-MP3IWMA

file with the MP3IWMA extension or a medium containing non MP31 WMA files.

Bit Rates

The unit supports bit rates from 32 - 320 kbps.

17