HD5212
CD Player Operation
cop mode can only be accessed when a disc is inserted. If a disc is already in place, press the SRC button (2) to access COP mode and begin playback automatically.
Insert CD
Press the open button (9) and allow the front panel to fold down to display the disc slot. With the label surface facing up, fully insert a compact disc into the slot until the mechanism engages and pulls the disc in. After inserting a disc, lift the front panel up to return it to the closed position and begin playing the disc.
Eject CD
To eject a disc, first press the open button (9) and
allow the front panel to fold down to display the disc slot (24).
Press the eject button (25) located to the right of the disc slot to eject the disc. If the disc is not removed from the unit within 15 seconds, the disc will be reloaded to prevent accidental damage.
NOTE: The unit is designed for play of standard 5" (12 cm.) compact discs only. Do not attempt to use 3" (8 cm.) CD singles in this unit, either with or without an adaptor, as damage to the player and/or the disc may occur. Such damage will not be covered by the warranty on this product.
~
will appear on the display. Press and hold the TUNE/CH » (10) or TUNE/ CH « (11) button for more than one second to fast forward or fast reverse through the disc. CD play starts when the button is released.
Intro Scan (SCN)
During disc play, press 2/SCN (14) to play the first 10 seconds of each track on the disc. When the desired track is reached, press 2/SCN again to end the scan and play the selected track.
Repeat (RPT)
Press 3/RPT (15) during disc play to continuously repeat the track. Press 3/ RPT again to stop repeating.
Random (SHF)
Press 4/SHF (16) during disc play to play all tracks on a CD in random, shuffled order. Press 4/SHF again to stop random play.
Display 103 Tag Information
Press the DISP button (7) to display any text encoded on the CD (song title, artist, etc.).
60 19
Pause
Press the 1/>/11 button (13) to suspend disc play. Press the play/pause button again to resume disc play.
Track Select
Press the TUNE/CH » (10) or TUNE/CH «(11) button for less than one second to advance to the next track on the CD. The selected track number
CD Player Error Codes
If a problem should develop while operating the CD player, an error code (Error 1, Error 2, etc.) may appear on the display panel. This can indicate a number of problems with the unit, including a mechanical error or an error in the microprocessor control of the player. If an error code should appear, try
15
