Connections & Setup
Using the CMPT Jack
Connect a component, such as a VCR, DVD player or Satellite Receiver, to the TV using the CMPT jacks. Connect Component cables to the Y Pb Pr VIDEO IN jacks on the bottom panel of the TV and to the Component Out jacks on the component. Then connect audio cables to the CMPT AUDIO IN jacks (R and L) on the bottom panel of the TV and to the Audio Output jacks on the component.
Note: The CMPT input also accepts Y Cr Cb signals. Your TV will automatically adjust to that type of signal.
Pr | Pb | Y | R AUDIO | L/ |
| VIDEO IN |
| IN | Mono |
CMPT
AV component
Using the RGB Jack
Connect a component, such as a DVD player or digital cable box, to the TV using the RGB jack. Connect one end of a 15 pin
AUDIO
IN
RGB
AV component
Chapter 1 | Graphics contained within this publication are for representation only. | 7 |