Sangean Electronics DT-220A manual Display backlight, Lock switch, Earphones

Models: DT-220A

1 25
Download 25 pages 26.73 Kb
Page 10
Image 10

Display backlight

Pressing the Light button will switch on the display backlight and illuminate the display for approximately 7 seconds.

Lock switch

The lock switch located on the right side of your radio is used to prevent unintentional operation.

1.Slide the Lock switch to the up ‘ locked ‘ position, the symbol will appear is the display.

The Power and all other buttons will be disabled except the Light button. This will prevent accidental operation when the radio is packed in a suitcase. To release the Lock switch, move the switch to the

down ‘unlocked’ position, the symbol will be removed from the display.

Earphones

The earphones fitted to your radio are equipped with an auto wind system to allow for easy storage.

1.Gently pull out the earphones from the right hand side of the radio.

2.Slide the Loudspeaker/Headphone switch to the

position, the loudspeaker will mute.

3. to retract the earphones, slide the switch on the GB rear of the cabinet. Hold onto the earphones while they rewind into the cabinet.

4. Slide the Loudspeaker/Headphone switch to the position to return to normal operation.

9

Page 10
Image 10
Sangean Electronics DT-220A manual Display backlight, Lock switch, Earphones