Sangean Electronics HDT-1 user manual Advanced Information

Advanced Information

Long press INFO button for 2 seconds to enter Advanced Information. Press and release INFO button will cycle through information of RESET, LCD Contrast Adjust, Backlight Brightness Control, (For HDT-1X: Stereo/Mono Mode, Analog Mode, Split Audio Mode), Bit Error Rate, The carrier to noise ratio, FUSE Bit Check , Transmission Mode, Station ID and Software version.

a. RESET –

in RESET mode, press PRESET button to RESET the tuner. The tuner setting will be reset to its initialized factory setting.

b. LCD Contrast –

pressing TUNING UP or DOWN button to adjust LCD contrast. c. Back Light Setting –

pressing TUNING UP or DOWN button to adjust Back Light. (for HDT-1X only)

d. Stereo/Mono Mode –

pressing TUNING UP or DOWN button to adjust Stereo/mono. (only for HDT-1X )

e. Analog Mode –

pressing TUNING UP or DOWN button to turn on/off HD. (for HDT-1X only)

f. Split Audio Mode –

pressing TUNING UP or DOWN button to split audio on/off. (for HDT-1X only)

g. Bit Error Rate

h. The carrier to noise ratio i. Fuse Bit Check

j. Transmission Mode ,

k. Station ID and HDT-1/HDT-1X

l. Software version are for factory and after sales service reference.

16

20070425_HDT-1&HDT-1X_381R20S-A.p6519 2007/4/30, ¤U¤È 01:44