Sangean Electronics HDT-1 user manual Getting started

Getting started

Step 1.

Inspect package to insure that all parts & accessories are included.

Step 2.

Find a proper location for your new HDT-1/HDT-1X HD Radio Tuner following the guidelines on table 1.1.

Step 3.

Connect the included or other external FM antenna to Figure 2, #13.

Step 4.

Connect the included or other external AM antenna to Figure 2, #14.

NOTE:

TO IMPROVE RECEPTIONANDDECREACE INTERFEARANCE FROM YOUR NEW HDT-1/HDT-1X PLACE THE AM LOOP ANTENNAAT LEAST 50MM AWAY FROM UNIT.

Step 5.

Connect your new HDT-1/HDT-1X to your AV system using either the RCA Connection or Optional SPDIF Connection (On HDT-1X Model Only). Always connect to your AV system first, then to your new HDT-1/HDT-1XTuner.

NOTE WHICH INPUT YOU ARE USING WHEN CONNECTING THE HDT-1/HDT-1X TUNER TO YOUR AV SYSTEM FOR LATER REFERENCE.

a. Using RCA Cables

i.Connect included or premium RCA cables to your AV system.

ii.Connect opposite end of the included or premium RCA cables to your new HDT-1/HDT-1X HD Radio Tuner to Figure 2, #15 & #16.

b.Using Optional SPDIF connection (On HDT-1X only). Always prevent excessive bending of the optical cable as this may distort audio and/ or cause damage to your AV system or HDT-1/HDT-1X HD Radio Tuner.

i.Connect optical cable to your AV system according to the cables manufacturers directions.

ii.Connect opposite end of the optical cable to your new

HDT-1/HDT-1X using connectors in Figure 2, #17

Step 6.

Connect the AC power cable to the HDT-1/HDT-1X using connector in Figure 2, #18. Connect the opposite end into an AC outlet located near the unit.

8

20070425_HDT-1&HDT-1X_381R20S-A.p6511 2007/4/30, ¤U¤È 01:44