Sangean Electronics HDT-1 user manual Seek Function, HD SEEK function, Using AM and FM presets

Seek Function

To seek to another clear station, use the SEEK toggle button.

Press and release the SEEK UP or DOWN will go to the next available station with good signal. Press any key to stop SEEK function.

HD SEEK function

Using the HD SEEK button, the tuner will seek to the next available HD station. This function will also scan to the Multicast program if available. Press and release HD SEEK UP or DOWN will go to the next available HD station with good signal. Press any key to stop HD SEEK function.

Using AM and FM presets

Preset stations

There are 20 preset stations for FM (10 x FM1, 10 x FM2) and 20 preset stations for AM (10 x AM1, 10 x AM2). First select the AM/FM using the band selection button ( AM1, AM2, FM1, FM2 ) , then press and hold for 3 seconds for the number 0-9 of where you would like to store this station until display indicating the station is stored.

For HDT-1 only: Note:

If presets are full, the display will appear FULL. Press and hold the number key for more than 5 seconds, the current station will replace the previous memorized station. And the display will show PRESET – X stored.

14

20070425_HDT-1&HDT-1X_381R20S-A.p6517 2007/4/30, ¤U¤È 01:44