Sangean Electronics PR-D9W manual 2-4, Setting up the tuning step increment

Setting up the tuning step increment

1.Make sure your radio is in power off mode.

2.Press and hold the Band/step button until the FM tuning step setting begins to flash.

3.Press the Tuning Up / Down buttons to select either 100kHz or 200kHz for FM radio, and press and release the Band/step button to confirm the setting. And the AM tuning step setting will begin

to flash.

4.Press the Tuning Up / Down buttons to select either 9kHz or 10kHz for AM radio, then press and release the Band/step button to confirm the setting.

2-4

3-4

GB

12