Sangean Electronics PR-D9W manual Setting the time format

Setting the time format

The clock display used in stand-by mode and on the playing mode screens can be set to 12 or 24 hour format. The selected format is then also used when setting the alarms.

1.With your radio switched off, press and hold the Band/step button until the radio beeps once and the display shows FM tuning step setting flashing.

2.Press and release the Band/step button, and the display will show AM tuning step setting flashing. Press and release the Band/step button again, and the display will show time format setting flashing.

3.Press the Tuning Up / Down button to select either 12 or 24 hour format.

4.Press and release the Band/step button to confirm the setting.

If the 12 hour clock format is chosen, the radio will then use the 12 hour clock for the setting of alarms, and will display a 12 hour clock for the setting of alarms, and will display a 12 hour clock with an AM or

PM indicator.

1-2,4

3

GB

18