Sansui HDLCD185W owner manual Remote control, Battery Precautions

Remote control

		6.MENU Button - Use to display the On-Screen
1		menu function.
		7.SLEEP Button - To set the LCD TV to turn off
		after a preset amount of time, use the SLEEP
2		button on the remote control.
		8.CCD Button - Used to display the Closed Caption
		menu screen.
3	10	9.AUDIO Button - Change soundtrack language.
	11	10.RECALL Button - This button allows you to go
		back to the previous channel selected by just
4		pressing the RECALL button. Press this button
	12	again to return to the channel you were watching.
		11.VOL (VOLUME) + / – / CURSOR		/ Buttons
5	13	- Used to operate the menu functions of the LCD
		TV. Press the	button to increase, or the button
6	14	to decrease the sound level.
7	15	12.ENTER Button - Use to enter or select
8	16	information for On-Screen operations.
		13.DISPLAY Button - When you press this button,
9
		the current information will be displayed on a
1.POWER Button - Used to turn the power on/off to		screen. To remove the display from the screen,
		press this button again.
the LCD TV.		14.MUTE Button - To turn off the sound, press this
2.Direct Channel Selection Buttons (0-9) - Allows		button once. The LCD TV will be silenced and
direct access to any channel of the LCD TV.		the symbol “Mute” will appear on the screen. The
3.– Button -This button is the “–” button used when		muting feature can be released by pressing the
		MUTE button again or one of the VOL (VOLUME)
selecting digital channels.
		+ or – buttons.
4.CH (CHANNEL) + / – / CURSOR	/ Buttons -
		15.INPUT SELECT Button - Use to change the
Used to operate the menu functions of the LCD TV,

and to change the channels of the LCD TV.	external input.
	16.SCREEN SIZE Button - Used to change the
5.EXIT Button - Press to remove setup menu.
	picture size.

Before using the remote control, batteries must first be installed.

HOW TO INSTALL BATTERIES

1.Open the battery compartment cover.

2.Install two “AAA” batteries (supplied).

3.Replace the battery compartment cover.

Use two “AAA” size batteries. The batteries may last approximately one year depending on how much the remote control is used. For best performance, it is recommended that batteries should be replaced on a yearly basis, or when the remote operation becomes erratic. Do not mix old and new batteries or different types.

BATTERY PRECAUTIONS

These precautions should be followed when using batteries in this device:

• Use only the size and type of batteries specified.

• Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device.

• Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.

• If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

• Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions.)

10