Sansui HDLCD2600 owner manual Picture control adjustment in the Component and PC mode, Auto Adjust

Picture control adjustment in the Component and PC mode

You can adjust to optimize the performance of the TV in the Component and PC mode.

NOTE:

•If no buttons are pressed for more than approx. 30 seconds, the Menu- screen will return to normal Monitor- screen automatically.

•The “Component Set” and “PC Set” settings are not effective for other input modes.

Example: Adjust the H-Pos in the component mode.

1 Press INPUT SELECT repeatedly to select the component

	mode.		￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿
2	component mode. Then press
	Press MENU during the
	▲ or ▼ to select “Feature”
	menu, then press .		￿￿￿￿￿￿	￿￿￿￿￿	￿￿￿￿￿￿￿￿	￿￿￿￿￿￿￿￿￿￿
3	Press ▲ or ▼ to select		￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿
	“Component Set”, then press
	or ENTER.		￿￿￿￿￿￿	￿￿￿￿￿	￿￿￿￿￿￿￿￿	￿￿￿￿￿￿￿￿￿￿
4	Press ▲ or ▼ to select
		H-Pos		48
		C o m p o n e n t s e t t i n g - 7 2 0 x 4 8 0 p @ 6 0 / 5 9 . 9 4 H z
	“H-Pos”, then press or	V-Pos		48
	ENTER.	Clock		50
		Phase		50
		Auto Adjust
		Setting
						Preset

To Move Enter To Select Menu To Exit

5 Pressorto adjust the setting.

•Press ▲ or ▼ to change the adjusting item.

H-Pos 48

H-Pos:To adjust the horizontal position of the image on the Component or PC mode.

V-Pos:To adjust the vertical position of the image on the Component or PC mode.

Clock:To minimize any vertical bars or stripes visible on the screen background.

Phase:This must be adjusted after the frequency of the Component or PC mode has been set to 60hz to optimize picture quality (page 16).

Auto Adjust

(PC Setting only): To optimize “H-Pos”, “V-Pos”, “Clock” and “Phase” automatically.

Setting:To return your settings to the factory settings.

6 Press MENU to return to the normal screen.

39