Sansui SLED2237 How To Install Batteries, MENU Button - Use to display the On-Screen, Buttons

2. Install two “AAA” batteries (supplied).

3. Replace the battery compartment cover.

Remote control

		6.MENU Button - Use to display the On-Screen
1		menu function.
		7.AUDIO Button - Change soundtrack language.
2		8.INPUT SELECT Button - Use to change the
		external input.
		9.PICTURE SIZE Button - Use to change the
3	10	picture size.
		10.RECALL Button - This button allows you to go
4	11	back to the previous channel selected by just
		pressing the RECALL button. Press this button
5	12	again to return to the channel you were watching.
	13	11.MUTE Button - To turn off the sound, press this
		button once. The TV will be silenced and the
6	14	symbol “Mute” will appear on the screen. The
		muting feature can be released by pressing the
7	15	MUTE button again or one of the VOL (VOLUME)
8	16	+ or – buttons.		/	Buttons
9		12.VOL (VOLUME) + / – / CURSOR
	17	- Use to operate the menu functions of the TV.
		Press the	button to increase, or the		button to
		decrease the sound level.
1. (POWER) Button - Use to turn the power on/off		13.ENTER Button - Use to enter or select
		information for On-Screen operations.
to the TV.		14.EXIT Button - Press to remove setup menu.
2.Direct Channel Selection Buttons (0-9) - Allows
		15.CCD Button - Use to display the Closed Caption
direct access to any channel of the TV.
		menu screen.
3.– Button -This button is used when selecting
		16.DISPLAY Button - When you press this button,
digital channels.
		the current information will be displayed on a
4.SLEEP Button - To set the TV to turn off after a
		screen. To remove the display from the screen,
preset amount of time, use the SLEEP button on		press this button again.
the remote control.	/	17.Time Shift control Buttons - See page 23.
5.CH (CHANNEL) + / – / CURSOR
Buttons - Use to operate the menu functions of
the TV, and to change the channels of the TV.
Before using the remote control, batteries must first be installed.
HOW TO INSTALL BATTERIES		Use two “AAA” size batteries. The batteries may last
1. Open the battery compartment cover.		approximately one year depending on how much the
		remote control is used. For best performance, it is
		recommended that batteries should be replaced on a
		yearly basis, or when the remote operation becomes
		erratic. Do not mix old and new batteries or different
		types.

BATTERY PRECAUTIONS

These precautions should be followed when using batteries in this device:

• Use only the size and type of batteries specified.

• Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device.

• Do not mix different types of batteries together (e.g. Alkaline, Carbon-zinc or Rechargeable) or old batteries with fresh ones.

• If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

• Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions.)

EN 10