CH +/-
Press and release CH + /
For proper operation, before selecting channels, they should be set into the memory. See “Memorizing channels” on page 18.
DISPLAY
Press DISPLAY to display the current information on the screen.
When the TV receives a digital signal, the digital information will appear.
|
| HDTV_Moving_Picture... | Sleep Timer |
|
| |
|
| Off |
|
| ||
| Digital Air | English |
|
| ||
| No Program Information is available |
|
|
| ||
USB Memory Information |
|
|
|
| ||
| Play Time : |
|
|
|
| |
Message : Now Live View |
|
|
|
| ||
| USB Memory is unplugged |
|
|
|
| |
| Full |
|
|
| ||
| 1080i |
|
|
| ||
• Channel number |
| • | Station name | |||
• | Channel label (if preset) • | Broadcast program name | ||||
• |
| • | Signal type | |||
• | Sleep timer |
| • | Audio language | ||
• | Program guide |
| • | Picture size | ||
• | Resolution |
| • | Time Shift display | ||
When the TV receives an analog signal, the analog information will appear.
14Sleep Timer
GOff
Analog Cable
Mono
Full
480i
• | Channel number | • Channel label (if preset) | |
• | • | Signal type | |
• | Sleep timer | • | Picture size |
• | Audio information | • | Resolution |
| (Stereo, SAP or Mono) |
|
|
Press DISPLAY again to clear the call display.
NOTE:
• After a few seconds, DISPLAY screen will return to normal TV operation automatically.
SLEEP
To set the TV to turn off after a preset amount of time, press SLEEP on the remote control. The clock will count up 10 minutes for each press of the SLEEP but- ton (Off, 0h 10m, 0h 20m, ..., 2h 0m). After the sleep time is programmed, the display will appear briefly every ten minutes to remind you that the sleep timer is operating. To confirm the sleep timer setting, press SLEEP and the remaining time will be displayed for a few seconds. To cancel the sleep timer, press SLEEP repeatedly until the display turns to Off.
Quick guide for menu operation
Call menu and for example: Select Language. 1 Press INPUT SELECT to select TV mode.
2 Press MENU. The TV menu screen will appear.
Main Menu
Picture
Audio
CH Channel
Lock
Setup
3 | :Select |
| ENTER :Set |
Press | or | to select “Setup”, then press or | |
ENTER. |
| ||
4 | Press | or | to select “Language”, then press |
or | to select the desired language. | ||
…on the following pages the menu can be called in the same way as here.
5 Press EXIT to return to the normal screen.
NOTE:
• If no buttons are pressed for more than about 60 seconds, the menu screen will return to normal operation automatically.
EN 16
