4: Install Threaded Tube Clamp & Clamp Knob
Slide the threaded tube clamps [05] onto the extension tubes [03], aligning the notches in the threaded tube clamp and cross tubes [02].
Snap the threaded tube clamps onto the cross tubes. |
|
Thread a clamp knob [04] onto each threaded tube |
|
clamp [05]. Do not tighten at this time. | [02] |
[03] |
|
[06] |
|
[05] |
|
[02]
[03]
[05][06]
5: Secure Vise Assemblies to Brackets
[04]
[07]
[22]
[01]
4x 
NOTE
Do not overtighten the nut [22]. The vise assembly [04] must rotate freely around the carriage bolt [07].
