7: Attach Speakers
7 - 1: Attach Speakers Using Threaded Fasteners
[03]
Determine the thread of the fastener required by threading each size fastener into the back of the speaker. Stop immediately if you encounter any resistance. Choose the correct thread size and
[03]fastener length for your speakers. If using M4 fasteners, [12] or [13], be sure to install the lock washer [20].
[08] - [13]
The speaker wires may be routed to the speaker terminals through the extension tubes [03]. Refer to the instructions provided with the large VisionMount™ Full Motion Mount for routing speaker wires.
CauTION
Disconnect the speaker wire from the receiver or amplifier when you route it through the upper or lower extension tubes [03] to avoid damage to the speakers, amplifier, or receiver.
