2Select plate.
For monitors with 100mm x 200mm or 200mm x 200mm hole spacing.
100mm x 200mm or
200mm x 200mm
100 mm
200 mm
100 mm
200 mm
A
[17]
B
Remove the existing plate from the head assembly.
[01]
Replace the existing plate with plate [03].
[17] [03]
3Install monitor brackets.
Before you begin, hand thread screws into the threaded inserts on the back of your Monitor to determine the correct screw diameter (M4 or M6). Verify that there are adequate threads to secure
the brackets to the monitor. If you encounter resistance, stop immediately and contact customer service.
CAUTION: Avoid potential personal injuries and property damage! Use the shortest screw and spacer combination to accomodate your needs. Using hardware that is too long may damage your monitor’s internal components.
| 7 |
