PLAYING AN MP3 DISC, Repeat Play Function, Repeat All

PLAYING AN MP3 DISC

REPEAT PLAY FUNCTION

Thank-you for choosing the Sanyo CDP-M303, CD/MP3 player. Please take a moment to read this instruction booklet so you will become familiar with the many features of this unit.

Note: Because an MP3 disc has a large capacity, the disc-reading time will be longer.

Switch on the power, open the CD door, put the disc inside the unit correctly and close the CD door.

Press PLAY/PAUSE, and READING appears on the screen. The disc is read in the following order:

MP3



Begin to read disc	Catalog 1		Track number
		Album name
MP3	MP3				MP3



Catalog 2 Track Number	Total Catalogs'	Total tracks'		The 1st track		ESP
(including the	number	number		starts playing		signal
tracks of the
tracks of the					Information of
previous catalog)					Information of
previous catalog)					the current track
					the current track

As the diagram above illustrates, the display will show the track number in the context of the entire disc regardless which catalog or album is being played. As an example, if an MP3 disc has 14 catalogs and 156 tracks in total, and catalog 1 has 16 tracks and catalog 2 has 14 tracks, track 26 in catalog 2 would show in the display (as in diagram above).

Instructions for PLAY/PAUSE, STOP/POWER OFF, FORWARD/BACKWARD, etc., are the same for MP3 discs as for CD discs.

NOTE: Because of the anti-skip mechanism, the CD stores 120 seconds of play into memory. Therefore, the CD will stop spinning occasionally; listening will not be interrupted.

SINGLE TRACK REPEAT

During playback, press the MODE button once to repeat the track that is

playing." " will appear.