15
TRACK-SELECTING PLAYBACK
16
ELECTRONIC EQ SETTING
Press FORWARD SKIP/SEARCH (or BACKWARD SKIP/SEARCH) to select the track you wish to play (refer to CD instructions for additional information.)
During playback, press CD ALBUM/10+ to jump in increments of 10 within the current catalog. Then use the forward and backward skip/search to refine your
Press and hold ALBUM/10+, the display will shows catalog " " .
In PLAY mode, press EQ/PROGRAM repeatedly to select one of DBB (Deep Bass Beat), POP, CLASSIC, JAZ, ROCK or NORMAL.
PROGRAM PLAY (upto 64 tracks can be edited)
selection.
To select a track in a different catalog, first select the catalog of your choice, and then the track, as follows:
Press and hold ALBUM/10+, catalog appears in the display.
Press the SKIP/SEARCH to select catalog.
Press the ALBUM/10+ again and the first track of the selected catalog appears.
Press SKIP/SEARCH to select the exact track of your choice, and then press
PLAY/PAUSE
NOTE: Example to follow, selection of track
2 of catalog 9:
Press SKIP/SEARCH ( or ) to
select catalog 9, and the display shows :
Press ALBUM/10+ again, and the 1st track in catalog 9 will flash:
NOTE: This can only be done in STOP mode. After pressing STOP, the display will remain active for ____ seconds.
1.In STOP mode, press EQ/PROGRAM.
2.Press SKIP/SEARCH to select desired catalog.
3.Press EQ/PROGRAM again.
4.Press SKIP/SEARCH to select the desired tracks.
5.Repeat the above steps to program the other tracks.
6.Press PLAY/PAUSE to enter program play.
As an example, to select track 3 in catalog 5:
1. | In STOP mode, the display shows | |
| MP3 | " . |
| " | |
2. | Press EQ/PROGRAM. The display shows | |
| " | " and the catalog " " |
| flashes. |
|
MP3
PROGMP3
PROGMP3
PROGMP3
PROGMP3
The first track is in catalog 1 after
pressing PLAY/PAUSE, and the display | Press SKIP/SEARCH to select track 2, | ||||
shows as follows: | and then press PLAY/PAUSE to start | ||||
|
|
| playing. | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3.Press SKIP/SEARCH to select catalog 5. The display shows" " .
4.Press EQ/PROGRAM, and the track
number " " flashes.
5.Press SKIP/SEARCH to select track 3, and
" " appears.
6. Press EQ/PROGRAM again; " " appears, ready to select the second track.
7.Repeat the above steps to select the desired tracks.
8.When programming is complete, press PLAY/PAUSE to begin program playing mode.
PROGMP3
PROGMP3