ANALOGUE AND DIGITAL OPERATION

Switching into / from standby mode

The Standby mode is used for switching the TV set off for short periods of time. In standby mode the TV is switched off but is still receiving mains power.

To turn the TV set into standby mode, press the 4 button.

The red power indicator illuminates more brightly.

To turn the TV set ON from standby mode, press any of the following buttons: 4, 5, 6or 0-9 buttons.

If you find the power indicator flashing, please turn the TV set off with the Standby switch and disconnect the power cord from the power outlet and contact our Service desk.

This warning is a sign to let you know that the power protection function of this TV set is now operating.

Auto shut off

This TV set will automatically switch into the standby mode, 10 minutes after a signal is no longer received. The time until the set will switch off is displayed on the screen.

Use of Audio Output Jacks

This TV provides the audio monitor output jacks on the left side of the cabinet. You can connect your audio equipment to these jacks to give you sound with your audio equipment.

To audio equipment

L/S R/D

AV3 AV2 AV1

Digital shot function

The Digital shot function allows you to capture and store up to 12 pictures in an album. You can view them as a slide show or individually.

How to capture a picture in Digital shot

Press the DS button on the remote control to capture the picture.

1 / 12 will appear on the screen and the picture will be stored in the Album. The album can store up to 12 pictures.

Album

1

 

 

:

Delete All

 

: Delete

 

 

 

 

 

:

Auto Album

OK : Select

 

CS :

Exit

 

 

 

 

 

 

 

 

How to view pictures in Digital shot

Press the CS button to view the picture Album.

Use the cursors 7, 8, e, dto highlight a picture for selection.

Press the OK button to display a full screen.

Use the cursors 7, 8to cycle through the picture.

Press the OK button to show the menu or the Blue button to return to Album.

Auto Album

Press the Green button to select Auto album. A slide show will begin from the highlighted picture. eg. 1-2-3-1-2-3.

If you wish to stop while auto album is activated press the green but- ton and it will stop.

To reactivate press the Green button again.

Press the Blue button to return to view digital shot pictures (Album).

Press the CS button to return to normal TV picture.

To delete

Press the Red button to Delete all saved pictures.

Select a picture already saved, then press the yellow button to delete a single image.

Press the CS button to return to normal TV picture at any time.

The pictures that are saved in Auto Album will be deleted when the power is disconnected.

19

Page 19
Image 19
Sanyo CE27LD4-B instruction manual Analogue and Digital Operation, Digital shot function