INSTALLATION
Step : 1 Connections ( Essential)
1.Connect your aerial cable socket to the back of the TV set. Fit the aerial cable as shown or as shown below when AV equipment is connected.
●Connecting DVD / VCR player/ Satellite receiver or
Set top box.
We recommend that you connect all other equipment before Plug and Play. The following examples are our recommended standard connec- tion.
LCD TV
L/S | R/D |
AV3 | AV1 |
Step : 2 Remote control battery installation
Install two "AAA" 1.5 volt batteries so that the "+" and
VCR
OUT
IN
Set top box
or |
|
| OUT |
Satellite | VCR | TV | IN |
| |||
|
|
| For satellite |
|
|
| only |
DVD |
|
|
|
For further information please consult your local dealer.
2.Connect the power cord of the LCD TV to a wall outlet.
✐The TV set is prepared for a mains voltage AC220~240V, 50Hz. To disconnect completely from the mains or, when the TV set is not to be used for an extended period of time, it is advisable to discon- nect the power cord from the power outlet.
✐For all aerial problems please consult your local dealer.
WARNING! High voltages are used in the operation of this set. Refer service to qualified service personnel.
5