Sanyo CLT-OHE40 1, 2, 3, 4, 5

– E9 –

Follow the steps if you need to replace a battery.

1Press down on the handset battery

case cover (use the finger indention

for a better grip) and slide the cover

downward to remove.

2Remove the existing battery and

unplug the connector from the jack.

3Plug the battery pack connector

(red, black, and white wires) into the

jack inside the battery compartment.

(The connector notches fit into the

grooves of the jack only one-way.)

Match the wire colors to the polarity

label in the battery compartment, and

push the connector in until you hear a

click.

4Make sure you have a good connection

by slightly pulling on the battery

wires. If the connection is secure, the

battery jack will remain in place.

5Place the battery case cover back on

the handset by sliding it upwards

until it clicks into place.

Rechargeable Lithium Ion Batteries

Must Be Recycled or Disposed of Properly

•Use only the SANYO battery (BT-0001) supplied with your

phone.

•Don't place the charger in direct sunlight or subject it to high

temperatures. The battery may not charge properly.

UU438DH_ENG.fm Page 9 Monday, June 13, 2005 7:00 PM