Sanyo CLT-OHE40 instruction manual Register the Handset, De-register the handset

UU438DH_ENG.fm Page 4 Monday, June 13, 2005 7:00 PM

Step 2: Register the Handset

YOU NEED TO REGISTER THE CLT-OHE40 TO A MAIN BASE BEFORE USE!

1 Be sure the handset battery is fully charged.

2 With the main base in standby mode (i.e., not being used), place the handset in the main base to begin registration.

For compatible models in the CLT-E23 and CLT-E30/32/33 series:

1)Disconnect the AC adapter.

2)While holding the find handset key, connect the AC Adapter:

Keep pressing the key until the CHARGE LED starts to blink.

3)On the handset, press and hold # until you hear beep.

3 Handset Registering will appear in the LCD. Once Registration Complete is displayed, the extra handset is registered to the base. If Registration Failed appears, please try these steps again.

De-register the handset

1)Press and hold END and # for more than 5 seconds. 2)Select the handset ID to be de-registered from the list.

The phone will ask you to confirm the deregistration. Select Yes.

– E4 –