Sanyo CLT-OHE40 instruction manual Connect the Charger

UU438DH_ENG.fm Page 3 Monday, June 13, 2005 7:00 PM

Step 1: Connect the Charger

1 Connect the AC adapter to the DC

IN 9V jack and to a standard 120V AC wall outlet.

2 Set the charger on a desk or tabletop, and place the handset in the charger with the keypad facing forward.

3 Make sure the CHARGE LED illuminates. If the LED does not illuminate, check to see that the AC adapter is plugged in and that

the handset makes good contact with the charger charging contacts.

Notes:

•Use only the supplied AD-708 AC adapter. Do not use any other AC adapter.

•Place the charger close to the AC outlet so that you can unplug the AC adapter easily.

4 Charge the handset for 15-20 hours before using. Recharge your handset on a regular basis by returning the handset to the charger after each phone call.

– E3 –