Panasonic DMC-LS75, DMC-LS60 Layout, When printing different pictures on 1 sheet of paper

Connecting to other equipment

• [PAGE LAYOUT]

(Possible layouts on the camera)

FSettings on the printer are prioritized.

G1 page with no frame print

H1 page with frame print

I2 pages print

J4 pages print

•An item cannot be selected if the printer does not support the page layout.

■Layout printing

•When printing a picture several times on 1 sheet of paper

For example, if you want to print a picture 4 times on 1 sheet of paper, set [PAGE LAYOUT] to [J] and then set the number of prints to 4 for the picture on [NUM. OF PRINTS].

•When printing different pictures on 1 sheet of paper

For example, if you want to print 4 different pictures on 1 sheet of paper, set [PAGE LAYOUT] to 4-picture printing [J] and then set [NUM. OF PRINTS] for the pictures to 1.

•Do not disconnect the USB connection

cable when the cable disconnection warning icon [K] is indicated. (Depending on the printer, the icon may not be displayed.)

•If the remaining battery power becomes low while the camera and the printer are connected, the status indicator blinks and the alarm beeps. If this happens during printing, press [MENU/SET] and stop printing at once. If not printing, disconnect the USB connection cable.

•The camera is receiving an error message from the printer when the [*] indication lights orange during printing. After finishing printing, make sure there are no problems with the printer.

•If the total number of ordered prints or the number of pictures set for print is large, printing is performed at intervals. In such cases, the number of remaining prints shown on the display will differ from the number of prints you set. The discrepancy, however, does not indicate an error.

•Date print function on the printer may have priority over the same settings on the camera. Check the setting on the printer as well.

•When the mode dial is set to a choice

other than print mode [ ], [USB MODE CHANGED. PLEASE REMOVE THE USB CABLE.] appears on the camera’s LCD monitor. Set the mode dial back

to [ ] before disconnecting the USB connection cable. Disconnect the USB connection cable after canceling printing.

•When you want to print pictures with date, the [DATE STAMP] function (P75) is also useful. Note that if you use date stamp and then specify printing the date when you order prints or on a printer, both dates will be printed and may overlap.

90

VQT1C63